Formula 1October 28, 20263 min read
F1 tyres explained: soft, medium, hard, intermediate and wet
Why tyre colours matter, how fast they wear and how the right choice can win a race.
Formula 1October 28, 20263 min read
Why tyre colours matter, how fast they wear and how the right choice can win a race.
Tyres are the only part of a Formula 1 car that touches the road, and they decide a surprising number of races. All teams use the same supplier, Pirelli, so the difference is in how they use the tyres.
For dry races there are three slick tyres you can recognise by the colour of the marking on the sidewall: red for soft, yellow for medium and white for hard. The soft tyre gives the most grip but wears out fastest. The hard tyre lasts longest but is slower per lap. The medium sits in between.
When the track is damp, drivers use green intermediate tyres, which have a pattern to move water away. In heavy rain they switch to blue full wet tyres. Both can be used only when the track is wet enough.
In a dry race, every driver must use at least two different types of dry tyre. This is why you see almost everyone stop at least once. Pirelli chooses which three compounds are available at each race, so the soft at one circuit may be a different tyre from the soft at another.
Fast tyres win laps. The right tyres win races.
Teams balance speed against wear. A driver on fresh soft tyres can attack, while a driver on hard tyres may go much longer between stops. Watching which tyre a driver chooses tells you a lot about the plan.
Leave your e-mail address and we will tell you when Racinity is ready.
Get early accessSeriesOctober 27, 20262 min read
Every series has its own rhythm. A short tour of the ones Racinity starts with.
StrategyOctober 25, 20263 min read
A pit stop takes about two seconds, yet it can decide a race. Undercut, overcut, safety cars and the strategy behind them.